What exact frequency does Lora gateway uses?

Tech

Depending on where you are, the Lora gateway will appear more or less frequently. Depending on where you are, the Lora gateway will appear more or less regularly. For instance, your gateway will broadcast more often than someone in an area with less technological interference if you are close to an urban location where many people use their phones and other wireless devices. It’s advisable to test your gateway before installation if you live in a rural location to make sure there won’t be any device interference. In general, the frequency will be higher in more densely populated areas. It hovers around 868MHz in the US. It runs at 915MHz in Europe.

The Lora standard is built to operate simultaneously over a number of frequencies. A Lora gateway’s frequency can be tuned to either 2.4 GHz or 5 GHz. You’ll need to install a new module and make the appropriate changes to your device’s configuration to choose a different frequency. By selecting the correct operating frequency for your application, you can, for instance, use 2.4 GHz and 5 GHz signals on the same gateway simultaneously.

  • Properties used to define Lora gateways frequency.

Operating Frequency, Data Rate, and Backups Downlink (Uplink) Frequency are the properties used to define a Lorawan gateway’s operating frequency. The operating frequency is the rate at which a gateway sends and receives signals in a second. The better your network performs, the higher this value. The frequency range in which the equipment functions is its operating frequency. The rate at which information moves through this band is known as the data rate (usually measured in bits per second). Another feature used to describe a gateway’s working frequency, and data rate is Backups Downlink (Uplink) Frequency.

  • Lorawan and lora gateway uses the following frequencies to communicate with each other.

-915MHz ISM band for Europe and the Americas

-868MHz ISM band for Asia and Australia

-915MHz: Europe

-868MHz: US and Australia 902-928 MHz to transmit data up to 100 meters.

868 MHz to transmit data up to 10km

915 MHz to transmit data up to 10km

A Bluetooth headset or a fitness tracker has a power level of roughly ten mW, similar to that of the transmitter. To send data, you must be within 10 meters of the device. The Lora gateway operates similarly. It converses with one another using these frequencies as well. They can now be utilized internationally without worrying about interference from other technology. The Lora radio system is a low-power, long-distance communication method that can be applied to a wide range of situations. It is ideal for tasks like tracking the position of assets or sending data from sensors without exhausting their batteries because it uses very little power.

  • SARA-U and SARA-L gateways frequencies

The Lora gateway is a low-power wireless communication system that uses the 915 MHz or 868 MHz frequency bands to send data across great distances. It communicates with other LoRa devices and gateways using the straightforward LoRa protocol, which enables it to provide data like location, temperature, humidity, and even video. The SARA-U and SARA-L are two of the numerous varieties of Lora gateways.

The SARA-U is an ultra-narrow band gateway that uses frequencies of 915 MHz or 868 MHz, whereas the SARA-L is a wideband gateway that simultaneously employs both bands. Both can communicate with other devices by sending data over great distances using LoRa modulation.

The SARA-U and SARA-L are designed to function in challenging conditions. They may be utilized at temperatures ranging from -30°C to +70°C and have IP67 water resistance. While the SARA-L is a wideband gateway that simultaneously uses both bands, the SARA-U is an ultra-narrow band gateway that employs 915 MHz or 868 MHz frequencies. Both can communicate with other devices by using LoRa modulation to deliver data over great distances. Because it uses low power and can transmit data over great distances using the 915 MHz or 868 MHz frequency bands, the Lora technology is perfect for IoT applications. It communicates with other LoRa devices and gateways using the straightforward LoRa protocol, which enables it to provide data like location, temperature, humidity, and even video.

  • Best Lora frequencies

Your application’s environment and nature will determine the ideal frequency for Lorawan and lora gateways. 2.4 GHz is the most widely used frequency, and Wi-Fi routers and many smartphones operate on this frequency. The ability to utilize the same gateway with other devices that use this band, thanks this, makes it a wise choice. Another alternative is 5 GHz, which has fewer interference problems than 2.4 GHz and can carry data faster (up to 1 Gbps).

The ISM operating band, which includes the frequencies of 868 MHz, 915 MHz, and 923 MHz, is a crucial benefit of LoRa technology. These frequencies have substantially lower transmission losses and far better penetration through barriers like building walls and trees than the more widely used 2,4 GHz and 5 GHz.